Refilling Staples - Oce 3165 Operator's Manual

Refilling staples
The staple unit of the Océ 3165 is located on the front of the finisher. If desired,
this stapler can be unlatched, which will allow users to reload staples. If the
stapler is still latched and staples run out, a message will appear in the display
asking users to contact you (the key operator) to refill staples.
There are two different types of staple units: a 35 sheet stapler and a 50 sheet
stapler (depending on your machine version). If you do not know which type
of stapler you have in your Océ 3165, follow steps 1 through 3 in the procedure
below and check if the lid of the stapler looks like the one in figure 41 on
page 61. Then proceed from step 4 onwards in the related procedure (35 sheet
stapler or 50 sheet stapler).
New staples are available in special cartridges. Use S2 staples for the 50 sheet
stapler (order No. 29701443). For the 35 sheet stapler, use staples with order
No. 29701447.
Refill staples (35 sheet stapler)
Open the paper compartment door.
1
Slide the frame to the right with the blue handle marked 'A'.
2
[39] Sliding the frame of the paper compartment to the right
60 Océ 3165 Key Operator Manual