Changing The Standard Margin Shift - Oce 3165 Operator's Manual

Press the function button 'Save current settings' to program the new settings
5
as default.
[7] Functions for the definition of standard settings
Press start (
6
When ready, quit the key operator system.
7
Defining the factory settings as default
Access the key operator system (see page 13).
1
Open the 'Machine' section and select the 'Defaults' settings.
2
Press the function button 'Restore factory settings' to program the Océ factory
3
defaults as default (see figure 7).
Press start (
4
Quit the key operator system.
5

Changing the standard margin shift

The standard or default margin setting (i.e. the distance that the margin is
shifted on the copy) is set to 12 mm (12/24 inch). Any value between -25 and
25 mm (-1 and 1 inch) can be set as the new default margin shift value.
To set the standard size of the extra margin
Access the key operator system (see page 13).
1
Open the 'Machine' section and select the 'Defaults' settings.
2
Press the function button 'Standard margin shift' (see figure 7 on page 19).
3
Use the arrow buttons to change the standard margin shift.
4
Finally, quit the key operator system.
5
Configuration management
) to confirm the modified settings.
) to confirm the modified settings.
19