Changing Accounts; Changing The Copy/Print Limit - Oce 3165 Operator's Manual

Changing accounts

Having opened an account, you may need to change the default account
details, such as the account number and copy/print limit, and assign or change
a PIN code. After selecting an account, you can make the required changes.

Changing the copy/print limit

If the limit of an account is set to '0', the user or department can make an
unlimited number of copies. The number of copies to be made can be limited
by setting a value between '1' and '999999'. If the limit has been reached, the
users can make no more copies on this account until you reset the copy counter
or set a new limit.
[29] Changing the account limit
Changing the copy limit
Access the key operator system (see page 13).
1
Open the 'Accounting' section and select 'Account' settings.
2
Use the arrow buttons to go to the account to be changed.
3
Press the 'Change limit' function button.
4
Enter a new copy limit using the copy quantity buttons.
5
The numbers appear in the copy limit field on the display as you type.
If you make an error, press Cancel to erase the field and then enter the correct
6
numbers.
Press start ( ) to confirm.
7
When ready, quit the key operator system.
8
Account Management 49