Adjusting Armrest Height (Flip-Up Armrest); Adjusting Armrest Height (Following Armrest); Changing Resistance (Flip-Up/Following Armrest) - Invacare Storm4 Series User Manual

Invacare® Storm®⁴ Series
1. Loosen screws A .
2. Adjust component to desired position.
3. Tighten screws.

5.8.4 Adjusting Armrest Height (Flip-Up Armrest)

1. Loosen thumb screw A.
2. Adjust component to desired position.
3. Tighten thumb screw.
50
Fig. 5-26
Fig. 5-27

5.8.5 Adjusting Armrest Height (Following Armrest)

Tools:
• 5 mm Allen key
• 13 mm wrench
1. Loosen and remove screw A and nut B .
2. Adjust component to desired position.
3. Insert and tighten screw and nut.

5.8.6 Changing Resistance (Flip-Up/Following Armrest)

The movement of the flip-up and following armrests can be
set to have greater or less resistance.
Fig. 5-28
1529686-AA