Optional Equipment (Non-Lru); Garmin Software And Documents - Garmin G5 User Manual

Installation Manual
1.1.5.3 BNC CONNECTORS
BNC connectors may be required to terminate the antenna cable, depending upon
which antenna is used. Check the GPS antenna installation instructions for detailed
information.
1.1.5.4 HEX DRIVER
A 3/32" hex drive tool is required to secure the G5 to the panel as described in
Section 1.3, G5 Installation.
1.1.5.5 SD CARD
A microSD™ card can be used with the G5 for software updates and data logging.
Garmin recommends SanDisk® brand SD cards up to 32 GB.
1.1.5.6 PNEUMATIC HOSES AND CONNECTORS
Air hoses and fittings are required to connect pitot and static air to the G5. The
G5 has a female 1/8-27 ANPT fitting for each pitot and static port. Use appropriate
aircraft fittings to connect to pitot and static system lines.

1.1.6 OPTIONAL EQUIPMENT (NON-LRU)

1.1.6.1 ANTENNA BRACKETS/DOUBLER PLATES
See the G3X Installation Manual (190-01115-01) for detailed information.
1.1.6.2 SILICON FUSION TAPE
Use Garmin Part Number 249-00114-00 or similar to wrap the wiring/cable bundles.

1.1.7 GARMIN SOFTWARE AND DOCUMENTS

The G5 unit software and a panel cut-out DXF file are available for free download
from www.garmin.com.
4
Garmin G5 User's Manual 190-02072-00 Rev. B