The Ip Alias Screen - ZyXEL Communications P-660HW-Tx v3 Series User Manual

Table 27 Network > LAN > Client List
LABEL
Reserve
Modify
Apply
Cancel
Refresh

7.5 The IP Alias Screen

IP alias allows you to partition a physical network into different logical networks
over the same Ethernet interface. The ZyXEL Device supports three logical LAN
interfaces via its single physical Ethernet interface with the ZyXEL Device itself as
the gateway for each LAN network.
When you use IP alias, you can also configure firewall rules to control access
between the LAN's logical networks (subnets).
Note: Make sure that the subnets of the logical networks do not overlap.
The following figure shows a LAN divided into subnets A, B, and C.
Figure 42 Physical Network & Partitioned Logical Networks
Ethernet
Interface
P-660HW-Tx v3 Series User's Guide
DESCRIPTION
Select the check box in the heading row to automatically select all
check boxes or select the check box(es) in each entry to have the
ZyXEL Device always assign the selected entry(ies)'s IP address(es) to
the corresponding MAC address(es) (and host name(s)). You can select
up to 10 entries in this table.
Click the modify icon to have the IP address field editable and change
it.
Click this to save your changes.
Click this to restore your previously saved settings.
Click this to reload the DHCP table.
A: 192.168.1.1 - 192.168.1.24
B: 192.168.2.1 - 192.168.2.24
C: 192.168.3.1 - 192.168.3.24
Chapter 7 LAN Setup
127