Q/1P; Overview; What You Can Do In The 802.1Q/1P Screens; What You Need To Know About 802.1Q/1P - ZyXEL Communications P-660HW-Tx v3 Series User Manual

C
H A P T E R

15.1 Overview

This chapter describes how to configure the 802.1Q/1P settings.
A Virtual Local Area Network (VLAN) allows a physical network to be partitioned
into multiple logical networks. A VLAN group can be treated as an individual
device. Each group can have its own rules about where and how to forward traffic.
You can assign any ports on the ZyXEL Device to a VLAN group and configure the
settings for the group. You may also set the priority level for traffic trasmitted
through the ports.
Figure 103 802.1Q/1P
Ports

15.1.1 What You Can Do in the 802.1Q/1P Screens

• Use the Group Setting screen
1P, specify the management VLAN group, display the VLAN groups and
configure the settings for each VLAN group.
• Use the Port Setting screen
and assign traffic priority for each port.

15.1.2 What You Need to Know About 802.1Q/1P

IEEE 802.1P Priority
IEEE 802.1P specifies the user priority field and defines up to eight separate traffic
types by inserting a tag into a MAC-layer frame that contains bits to define class of
service.
P-660HW-Tx v3 Series User's Guide
802.1Q
VLAN Groups
(Section 15.2 on page
(Section 15.3 on page
15

802.1Q/1P

802.1P
Priority Levels
249) to activate 802.1Q/
252) to configure the PVID
243