Client List - ZyXEL Communications P-660HW-Tx v3 Series User Manual

Chapter 3 Status Screens
Table 4 Status Screen
LABEL
Status
Rate
Summary

Client List

AnyIP Table
WLAN
Status
Packet
Statistics
3.3 Client List
See Section 7.4 on page 126
38
DESCRIPTION
This field indicates whether or not the ZyXEL Device is using the
interface.
For the DSL interface, this field displays Down (line is down), Up (line
is up or connected) if you're using Ethernet encapsulation and Down
(line is down), Up (line is up or connected), Idle (line (ppp) idle), Dial
(starting to trigger a call) and Drop (dropping a call) if you're using
PPPoE encapsulation.
For the LAN interface, this field displays Up when the ZyXEL Device is
using the interface and Down when the ZyXEL Device is not using the
interface.
For the WLAN interface, it displays Active when WLAN is enabled or
InActive when WLAN is disabled.
For the LAN interface, this displays the port speed and duplex setting.
For the DSL interface, it displays the downstream and upstream
transmission rate.
For the WLAN interface, it displays the maximum transmission rate
when WLAN is enabled or N/A when WLAN is disabled.
Click this link to view current DHCP client information. See
on page 126.
Click this link to view a list of IP addresses and MAC addresses of
computers, which are not in the same subnet as the ZyXEL Device. See
Section 3.3 on page 38.
Click this link to display the MAC address(es) of the wireless stations
that are currently associating with the ZyXEL Device. See
on page 39.
Click this link to view port status and packet specific statistics. See
Section 3.6 on page 40.
for information on this screen.
Section 7.4
Section 3.4
P-660HW-Tx v3 Series User's Guide