Adding A Firewall Rule For Remote Management - ZyXEL Communications P-660HW-Tx v3 Series User Manual

Select Use WAN IP Address for the IP address update policy.
2e
Click Apply.
2f

4.6.3 Adding a Firewall Rule for Remote Management

By default, your ZyXEL Device firewall is enabled to secure your network from
attacks. In this tutorial, you add a firewall rule that lets you manage the ZyXEL
Device from the Internet.
Click Security > Firewall and select Rules.
1
Select WAN to WAN / Router and select the number of the last rule that has
2
been configured on this screen. Click Add.
The Edit Rule screen opens. Configure the screen using the following settings.
3
Select Active.
3a
Select Permit for matched packets.
3b
P-660HW-Tx v3 Series User's Guide
Chapter 4 Tutorials
63