Chapter 4 Tutorials
You need to specify a static routing rule on the ZyXEL Device to specify R as the
router in charge of forwarding traffic to N2. In this case, the ZyXEL Device routes
traffic from A to R and then R routes the traffic to B.
N1
This tutorial uses the following example IP settings:
Table 8 IP Settings in this Tutorial
DEVICE / COMPUTER
The ZyXEL Device's WAN
The ZyXEL Device's LAN
A
R's N1
R's N2
B
To configure a static route to route traffic from N1 to N2:
Log into the ZyXEL Device's Web Configurator in advanced mode.
1
Click Advanced > Static Route.
2
Click Edit on a new rule in the Static Route screen.
3
66
A
IP ADDRESS
172.16.1.1
192.168.1.1
192.168.1.34
192.168.1.253
192.168.10.2
192.168.10.33
R
N2
B
P-660HW-Tx v3 Series User's Guide