ZyXEL Communications P-660HW-Tx v3 Series User Manual page 310

Chapter 21 Logs
Table 98 CDR Logs
LOG MESSAGE
board %d line %d channel %d,
call %d, %s C01 Outgoing Call
dev=%x ch=%x %s
board %d line %d channel %d,
call %d, %s C02 OutCall
Connected %d %s
board %d line %d channel %d,
call %d, %s C02 Call
Terminated
Table 99 PPP Logs
LOG MESSAGE
ppp:LCP Starting
ppp:LCP Opening
ppp:CHAP Opening
ppp:IPCP
Starting
ppp:IPCP Opening
ppp:LCP Closing
ppp:IPCP Closing
Table 100 UPnP Logs
LOG MESSAGE
UPnP pass through Firewall
Table 101 Content Filtering Logs
LOG MESSAGE
%s: block keyword
%s
310
DESCRIPTION
The router received the setup requirements for a call.
"call" is the reference (count) number of the call.
"dev" is the device type (3 is for dial-up, 6 is for
PPPoE, 10 is for PPTP). "channel" or "ch" is the call
channel ID.For example,"board 0 line 0 channel 0, call
3, C01 Outgoing Call dev=6 ch=0 "Means the router
has dialed to the PPPoE server 3 times.
The PPPoE, PPTP or dial-up call is connected.
The PPPoE, PPTP or dial-up call was disconnected.
DESCRIPTION
The PPP connection's Link Control Protocol stage has started.
The PPP connection's Link Control Protocol stage is opening.
The PPP connection's Challenge Handshake Authentication Protocol
stage is opening.
The PPP connection's Internet Protocol Control Protocol stage is
starting.
The PPP connection's Internet Protocol Control Protocol stage is
opening.
The PPP connection's Link Control Protocol stage is closing.
The PPP connection's Internet Protocol Control Protocol stage is
closing.
DESCRIPTION
UPnP packets can pass through the firewall.
DESCRIPTION
The content of a requested web page matched a user defined
keyword.
The system forwarded web content.
P-660HW-Tx v3 Series User's Guide