RIP Board
1.
Remove the
"Outer EMC Shield" on page
2.
Remove the
"Left Rear Cover" on page
3.
Remove the USB connector screw type
4.
Remove the RIP board screw type
5.
Disconnect all cables from the RIP board and remove the board.
Left Rear Cover
1.
Remove the left rear cover screw type
2.
Open the MPF, remove the left rear cover screw type
remove the left rear cover.
5060-XXX
4-10.
4-11.
"232" on page 4-5
"232" on page 4-5
"323" on page 4-7
(A).
(B).
(A).
"323" on page 4-7
(B), and
Repair Information
4-11