Lexmark 13P0150 - C 750dtn Color Laser Printer Service Manual page 42

2xx Primary
code Message
272 Paper Jam
Clear Paper Path
280 Paper Jam
Clear Paper Path
2-22
Service Manual
5060-XXX
Secondary
Message
Leave Job in Finisher
Leave Job in Finisher
Description
Primary: Media is jammed in output Bin x. Open
the door of output Bin X to access the jam. If
sheets have been accumulated to be stapled or
offset when the jam occurred, the printer
alternately flashes the primary and secondary
messages to indicate that all accumulated sheets
not be removed during the jam clearing
procedure.
Secondary: When this message is displayed, do
not remove accumulated sheets during the jam
clearance procedure as the printer will not reprint
the removed sheets. Also, if the accumulated
sheets are removed, the portion of the job printed
after the jam will not be stapled.
Primary: Paper is jammed in the Finisher option,
open the side door or top cover to access the
jam. If sheets have been accumulated to be
stapled or offset when the jam occurred, the
printer alternately flashes the primary and
secondary messages to indicate that all
accumulated sheets not be removed during the
jam clearing procedure.
Secondary: When this message is displayed, do
not remove accumulated sheets during the jam
clearance procedure as the printer will not reprint
the removed sheets. Also, if the accumulated
sheets are removed, the portion of the job printed
after the jam will not be stapled.