Error Codes - 9XX
Error (900) Software Error
Description
1
This can occur when:
• The paper being fed is a
different size than selected
by the Setup Menu.
• Turning the machine off
and failing to wait at least
10 seconds before
switching it back on.
Error (941) Service ROM SIMM
Description
1
Code/Font
Error (939, 942, 943, 944) Service RIP Board
Description
1
29K processor
failure
Error (945) Service RIP Board
Description
1
ASIC 1 failure
2-46
Action
Replace the ROM SIMM.
Action
Replace the Video Controller Board.
Action
Replace the Video Controller Board.
Action
Feed the correct size paper.
After turning the machine off, wait
at least 10 seconds before turning
back on.
Before replacing the video
controller board, turn the printer
off and firmly reseat the board.