Finisher Feed Test; Finisher Sensor Test - Lexmark 13P0150 - C 750dtn Color Laser Printer Service Manual

Finisher Feed Test

This test verifies that media can be fed to a Finisher output bin and then stapled.
To run the Finisher Feed Test:
1.
2.
The printer feeds eight pieces of media to the selected finisher output bin where they are
stapled.
Note: No information is printed on the fed sheets as the laser is not engaged during this
test.
3.

Finisher Sensor Test

This test determines if the Finisher sensors are working correctly.
The following sensors are supported by this test:
To run the Finisher Sensor Test:
1.
2.
If you select Staple Sensors, the following is displayed:
If you select the Pass and Media Sensor Test, the following is displayed.
3-14
Service Manual
Select Finisher Feed Test from the menu.
Select a destination bin.
This test cannot be canceled or terminated once the test has begun. When the test
is complete the printer returns to the original screen.
* Staple Sensors
* Pass and Media
* Bin Level
Select Finisher Sensor Test from the menu.
Select the Staple Sensor you want to test from the menu.
Staple
C=CL SL=CL
C=Cartridge Presence Sensor
SL=Staple Low Sensor
Pass and Media
P=OP M=OP
P=Finisher Pass Thru Sensor
M=Finisher Medium Sensor.
5060-XXX