Paper Size Sensor Assembly
Note: The paper size sensor assembly contains components that easily fall apart as
you remove the assembly. Be careful not to lose any of the components.
1.
Remove the
"Left Rear Cover" on page
2.
Remove the
"Rear Fan Cover" on page
3.
Remove the
"Engine Board Shield" on page
4.
Open the waste toner container door and slide the container out.
5.
Remove the paper size sensor assembly screw type
6.
Remove the assembly.
Second Transfer Roll
1.
Remove the
"ITU Assembly" on page
2.
Lift the transfer roll from the front bearing and remove the transfer roll.
5060-XXX
4-11.
4-12.
4-40.
4-39.
"323" on page 4-7
Repair Information
(A).
4-41