Engine Board Shield
1.
Remove the
"Engine Board" on page
2.
Remove the engine board shield screw type
screw type
"232" on page 4-5
Waste Toner Auger Assembly
1.
Remove the
"RIP Card Shield Assembly" on page
2.
Remove the
"Engine Board Shield" on page
3.
Remove the waste toner auger assembly mounting screws (A) and remove the
assembly.
5060-XXX
4-13.
"323" on page 4-7
(B), and remove the shield.
(A),
4-36.
4-39.
Repair Information
4-39