Lexmark 13P0150 - C 750dtn Color Laser Printer Service Manual page 44

User Primary
Message
203 Paper Jam Clear
Paper Path
230 Paper Jam Clear
Paper Path
24x Paper Jam Clear
Paper Path
2-24
Service Manual
User Secondary Message
Leave Job in Finisher
Leave Job in Finisher
Leave Job in Finisher
5060-XXX
Explanation
Primary: Media has jammed due to a
transparency sensor mismatch. Open the printer
left door to access the jammed media.
Secondary: If sheets have been accumulated to
be stapled when the jam is detected, the printer
alternately flashes the primary and secondary
messages indicating the accumulated sheets
should not be removed during jam clearance.
Note: When the secondary message is displayed,
if the accumulated sheets are removed the printer
will not reprint these sheets. Also if the print job is
completed, the portion of the job printed after the
jam will not be stapled.
Primary: Paper has most likely jammed in the
Duplex unit. Remove the duplex tray to access
the jam.
Secondary: If sheets have been accumulated to
be stapled when the jam is detected, the printer
alternately flashes the primary and secondary
messages indicating the accumulated sheets
should not be removed during jam clearance.
Note: When the secondary message is displayed,
if the accumulated sheets are removed the printer
will not reprint these sheets. Also if the print job is
completed, the portion of the job printed after the
jam will not be stapled.
Primary: This paper jam message can apply to
both the 500 Sheet Option Tray and HCIT option.
Tray x(x=2 thru 4). Try opening Tray x, if the tray is
difficult to remove then you may need to remove
the tray above or below Tray x to remove the
jammed media.
Secondary: If sheets have been accumulated to
be stapled when the jam is detected, the printer
alternately flashes the primary and secondary
messages indicating the accumulated sheets
should not be removed during jam clearance.
Note: When the secondary message is displayed,
if the accumulated sheets are removed the printer
will not reprint these sheets. Also if the print job is
completed, the portion of the job printed after the
jam will not be stapled.