Lexmark 13P0150 - C 750dtn Color Laser Printer Service Manual page 84

Ready Bin X Full Message Displays - May be able to clear message
and will feed paper into Bin selected.
Note: This sensor is in a normally open position with the flag out of the sensor slot.
Step Action and Questions
1
Bin X Sensor (Bin X=Sensor 1 thru 5) - Check to make sure
the sensor is seated correctly in the side of tray X.
Is the sensor seated correctly?
2
Bin X Sensor Cable - Check to make sure that Bin X sensor
cable is connected to the sensor and to the Control Board.
Is the sensor cable connected correctly?
3
Bin X Sensor Flag - Check the Bin X sensor flag for binding
and proper operation.
Are there any problems with the sensor flag?
4
Bin X Sensor Cable continuity - Check the continuity of the
sensor cable.
Is there continuity?
Bin X Full - No message that Bin X is full displays.
Step Action and Questions
1
Bin X Sensor (Bin X=Sensor 1 thru 5) - Check to make sure
the sensor is seated correctly in the side of tray X.
Is the sensor seated correctly?
2
Bin X Sensor Cable - Check to make sure that Bin X sensor
cable is connected to the sensor and to the Control Board.
Is the sensor cable connected correctly?
3
Bin X Sensor Flag - Check the Bin X sensor flag for binding
and proper operation.
Are there any problems with the sensor flag?
4
Bin X Sensor Cable continuity - Check the continuity of the
sensor cable.
Is there continuity?
2-64
Service Manual
5060-XXX
Yes
Go to Step 2
Go to Step 3
Repair or
replace the
sensor flag
Replace the
Bin X Sensor
Yes
Go to Step 2
Go to Step 3
Repair or
replace the
sensor flag
Replace the
Bin X Sensor
No
Install the
sensor
correctly
Install the
sensor cable
correctly
Go to Step 4
Replace the
Bin X Cable
No
Install the
sensor
correctly
Install the
sensor cable
correctly
Go to Step 4
Replace the
Bin X Cable