Lexmark 13P0150 - C 750dtn Color Laser Printer Service Manual page 28

Error code
107 Printhead Error
108 Printhead Error
109 Printhead Error
110 Printhead Error
111 Printhead Error
2-8
Service Manual
5060-XXX
Action
Magenta Printhead Lost Hsync
Check for the correct installation of the all the cables to the RIP
Board assembly and to the Printhead assembly; J7, J8, and J9 on
the RIP Board. Go to "RIP Board" on page
connected correctly to the RIP Board and to the Printhead
assembly, replace the following FRU:
"RIP Board" on page 4-11
If this does not fix the problem replace:
Magenta Printhead Assembly - Go to
Note: Whenever a printhead assembly is replaced, it is necessary
to perform the "Printhead Adjustments" on page
Yellow Printhead Lost Hsync
Check for the correct installation of the all the cables to the RIP
Board assembly and to the Printhead assembly; J2, J3, and J4 on
the RIP Board. Go to "RIP Board" on page
connected correctly to the RIP Board and to the Printhead
assembly, replace the following FRU:
"RIP Board" on page 4-11
If this does not fix the problem replace:
Yellow Printhead Assembly - Go to
Note: Whenever a printhead assembly is replaced, it is necessary
to perform the "Printhead Adjustments" on page
Black Printhead Lost Hsync
Check for the correct installation of the all the cables to the RIP
Board assembly and to the Printhead assembly; J9, J10, and J11
on the RIP Board. Go to
are connected correctly to the RIP Board and to the Printhead
assembly, replace the following FRU:
"RIP Board" on page 4-11
If this does not fix the problem replace:
Black Printhead Assembly - Go to
Note: Whenever a printhead assembly is replaced, it is necessary
to perform the "Printhead Adjustments" on page
No first Hysnc - Cyan
Replace the following FRU:
Cyan Printhead Assembly - Go to
Note: Whenever a printhead assembly is replaced it is necessary
to perform the "Printhead Adjustments" on page
If this does not fix the problem replace:
"RIP Board" on page 4-11
No first Hysnc - Magenta
Replace the following FRU:
Magenta Printhead Assembly - Go to
Note: Whenever a printhead assembly is replaced it is necessary
to perform the "Printhead Adjustments" on page
If this does not fix the problem replace:
"RIP Board" on page 4-11
5-11. If the cables are
"Printheads" on page
5-11. If the cables are
"Printheads" on page
"RIP Board" on page 5-11. If the cables
"Printheads" on page
"Printheads" on page
"Printheads" on page
4-33.
4-1.
4-33.
4-1.
4-33.
4-1.
4-33.
4-1.
4-33.
4-1.