Lexmark 13P0150 - C 750dtn Color Laser Printer Service Manual page 61

User Primary
Message
62 Disk Full
63 Unformatted Disk
64 Unsupported Disk
Format
80 Fuser Maintenance
83 ITU Maintenance
5060-XXX
User Secondary Message Explanation
This message will be displayed when there is not
enough free space on the disk to hold the data
that have been requested to be written to the
disk. This message will be displayed for both
resource collection and PostScript when the disk
is full.
The following actions can be taken while this
message is displayed, however this will delete all
downloaded Fonts and Macros written to disk.
* Press Go to clear the message and continue
processing the print job
* Press >Menu or Menu< to access the Busy/
Waiting Menu group
The following functions may be available:
* Cancel Job
* Reset Printer
* Reset Active Bin
* Check Supply Levels
Note: Menu Lockout does NOT prevent access to
the Busy/Waiting Menu Group.
This message will be displayed when the printer
detects an unformatted disk at POST.
The following actions can be taken while this
message is displayed:
* Press Go to clear the message.
The disk will be marked as bad and normal
operation will continue, however disk operation
will not be allowed until the disk is formatted.
This message will be displayed when the printer
detects an unsupported disk format at POST.
This message may appear if the disk was
formatted on another system with a different
format.
The following actions can be taken while this
message is displayed:
* Press Go to clear the message.
The disk will be marked as bad and normal
operations will continue, however disk operations
will not be allowed until the disk is formatted.
These messages will be displayed when the
printer requires replacement of some worn
assemblies. These messages are independently
posted when either the ITU or Fuser need to be
replaced. Press Go to clear this message.
Diagnostic Information
2-41