Internet Access Setup; Chapter 27 Internet Access Setup - ZyXEL Communications P-792H User Manual

C
H A P T E R
Use this menu to configure your Internet connection. Use information from your
ISP along with the instructions in this chapter to set up your P-792H v2 to access
the Internet. Contact your ISP to determine what encapsulation type you should
use.

27.1 Internet Access Setup

Enter 4 in the main menu.
Figure 142 Menu 4: Internet Access Setup
The following table describes the fields in this menu.
Table 114 Menu 4: Internet Access Setup
FIELD
ISP's Name
Encapsulation
P-792H v2 User's Guide

Internet Access Setup

Menu 4 - Internet Access Setup
ISP's Name= MyISP
Encapsulation= ENET ENCAP
Multiplexing= LLC-based
VPI #= 0
VCI #= 33
ATM QoS Type= UBR
Peak Cell Rate (PCR)= 0
Sustain Cell Rate (SCR)= 0
Maximum Burst Size (MBS)= 0
My Login= N/A
My Password= N/A
ENET ENCAP Gateway= 0.0.0.0
IP Address Assignment= Static
IP Address= 0.0.0.0
Network Address Translation= SUA Only
Address Mapping Set= N/A
DESCRIPTION
Enter a descriptive name for your ISP for identification purposes.
Press [SPACE BAR] and then press [ENTER] to select the type of
encapsulation your ISP uses.
27
303