The Restart Screen - ZyXEL Communications P-792H User Manual

Reset to Factory Defaults
Click the Reset button to clear all user-entered configuration information and
return the P-792H v2 to its factory defaults. The following warning screen
appears.
Figure 127 Reset Warning Message
Figure 128 Reset In Process Message
You can also press the RESET button on the rear panel to reset the factory
defaults of your P-792H v2. Refer to
on the RESET button.

21.4 The Restart Screen

System restart allows you to reboot the P-792H v2 remotely without turning the
power off. You may need to do this if the P-792H v2 hangs, for example.
Click Maintenance > Tools > Restart. Click Restart to have the P-792H v2
reboot. This does not affect the P-792H v2's configuration.
Figure 129 Maintenance > Tools >Restart
P-792H v2 User's Guide
Section 1.5 on page 28
Chapter 21 Tools
for more information
279