ZyXEL Communications P-792H User Manual page 158

Chapter 12 VPN
Click Security > VPN to open the VPN Setup screen. This is a menu of your
IPSec rules (tunnels). The IPSec summary menu is read-only. Edit a VPN by
selecting an index number and then configuring its associated submenus.
Figure 72 Security > VPN > Setup
The following table describes the fields in this screen.
Table 43 Security > VPN > Setup
LABEL
No.
Active
Name
Local Address
158
DESCRIPTION
This is the VPN policy index number. Click a number to edit VPN policies.
This field displays whether the VPN policy is active or not. A Yes signifies
that this VPN policy is active. No signifies that this VPN policy is not
active.
This field displays the identification name for this VPN policy.
This is the IP address(es) of computer(s) on your local network behind
your P-792H v2.
The same (static) IP address is displayed twice when the Local Address
Type field in the VPN Setup - Edit screen is configured to Single.
The beginning and ending (static) IP addresses, in a range of computers
are displayed when the Local Address Type field in the VPN Setup -
Edit screen is configured to Range.
A (static) IP address and a subnet mask are displayed when the Local
Address Type field in the VPN Setup - Edit screen is configured to
Subnet.
P-792H v2 User's Guide