ZyXEL Communications P-792H User Manual page 72

Chapter 6 WAN Setup
Table 15 Network > WAN > More Connections: Edit (continued)
LABEL
Nailed-Up Connection
Connect on Demand
Max Idle Timeout
NAT
Back
Apply
Cancel
Advanced Setup
72
DESCRIPTION
Select Nailed-Up Connection when you want your connection
up all the time. The P-792H v2 will try to bring up the connection
automatically if it is disconnected.
Select Connect on Demand when you don't want the connection
up all the time and specify an idle time-out in the Max Idle
Timeout field.
Specify an idle time-out in the Max Idle Timeout field when you
select Connect on Demand. The default setting is 0, which
means the Internet session will not timeout.
SUA only is available only when you select Routing in the Mode
field.
Select SUA Only if you have one public IP address and want to
use NAT. Click Edit Detail to go to the Port Forwarding screen
to edit a server mapping set.
Otherwise, select None to disable NAT.
Click this to return to the previous screen without saving.
Click this to save your changes.
Click this to restore your previously saved settings.
Click this to display the More Connections Advanced Setup
screen and edit more details of your WAN setup.
P-792H v2 User's Guide