The following screen indicates that the Xmodem download has started.
2
Figure 201 System Maintenance: Starting Xmodem Download Screen
Run the HyperTerminal program by clicking Transfer, then Receive File as shown
3
in the following screen.
Figure 202 Backup Configuration Example
Type a location for storing the configuration file or click Browse to look for one.
Choose the Xmodem protocol.
Then click Receive.
After a successful backup you will see the following screen. Press any key to
4
return to the SMT menu.
Figure 203 Successful Backup Confirmation Screen
35.4 Restore Configuration
This section shows you how to restore a previously saved configuration. Note that
this function erases the current configuration before restoring a previous back up
configuration; please do not attempt to restore unless you have a backup
configuration file stored on disk.
FTP is the preferred method for restoring your current computer configuration to
your P-792H v2 since FTP is faster. Please note that you must wait for the system
to automatically restart after the file transfer is complete.
P-792H v2 User's Guide
Chapter 35 Firmware and Configuration File Maintenance
You can enter ctrl-x to terminate operation any time.
Starting XMODEM download...
** Backup Configuration completed. OK.
### Hit any key to continue.###
375