C
H A P T E R
Use this menu to configure Network Address Translation (NAT) on the P-792H v2.
30.1 Using NAT
Note: You must create a firewall rule in addition to setting up SUA/NAT, to allow traffic
from the WAN to be forwarded through the P-792H v2.
30.1.1 SUA (Single User Account) Versus NAT
SUA (Single User Account) is a ZyNOS implementation of a subset of NAT that
supports two types of mapping, Many-to-One and Server. See
page 324
for a detailed description of the NAT set for SUA. The P-792H v2 also
supports Full Feature NAT to map multiple global IP addresses to multiple private
LAN IP addresses of clients or servers using mapping types.
Choose SUA Only if you have just one public WAN IP address for your P-792H v2.
Note: Choose Full Feature if you have multiple public WAN IP addresses for your P-
792H v2.
P-792H v2 User's Guide
30
NAT Setup
Section 30.2.1 on
321