ZyXEL Communications P-792H User Manual page 367

types of diagnostic tests to evaluate your system, as shown next. Not all fields are
available on all models.
Follow the procedure below to get to Menu 24.4 - System Maintenance -
Diagnostic.
From the main menu, select option 24 to open Menu 24 - System Maintenance.
1
From this menu, select option 4. Diagnostic. This will open Menu 24.4 - System
2
Maintenance - Diagnostic.
Figure 197 Menu 24.4: System Maintenance - Diagnostic
xDSL
1.
TCP/IP
12. Ping Host
The following table describes the labels in this screen.
Table 134 Menu 24.4: System Maintenance - Diagnostic
FIELD
Reset xDSL
Ping Host
Reboot System
Command Mode
Host IP Address
Enter the number of the selection you would like to perform or press [ESC] to cancel.
P-792H v2 User's Guide
Menu 24.4 - System Maintenance - Diagnostic
Reset xDSL
Enter Menu Selection Number:
Host IP Address= N/A
DESCRIPTION
Enter 1 to reset the DSL connection on the WAN port.
Enter 12 to ping any machine (with an IP address) on your LAN or
WAN. Enter its IP address in the Host IP Address field below.
Enter 11 to reboot the P-792H v2.
Enter 22 to go to the Command Interpreter (CI) for further
diagnosis. You can also enter the CI using menu 24.8.
If you entered 1in the Enter Menu Selection Number field, then
enter the IP address of the computer you want to ping in this field.
Chapter 34 System Information & Diagnosis
System
21. Reboot System
22. Command Mode
367