Introducing The Web Configurator; Web Configurator Overview; Accessing The Web Configurator - ZyXEL Communications P-792H User Manual
G.shdsl.bis broadband gateway
Hide thumbs
Also See for P-792H:
- Compact manual (27 pages) ,
- Firmware release notes (27 pages) ,
- Quick start manual (10 pages)
Table of Contents
Advertisement
C
H A P T E R
2.1 Web Configurator Overview
The web configurator is an HTML-based management interface that allows easy P-
792H v2 setup and management via Internet browser. Use Internet Explorer 6.0
and later or Netscape Navigator 7.0 and later versions. The recommended screen
resolution is 1024 by 768 pixels.
In order to use the web configurator you need to allow:
• Web browser pop-up windows from your device. Web pop-up blocking is enabled
by default in Windows XP SP (Service Pack) 2.
• JavaScripts (enabled by default).
• Java permissions (enabled by default).
See the chapter on troubleshooting if you need to make sure these functions are
allowed in Internet Explorer.
2.2 Accessing the Web Configurator
Make sure your P-792H v2 hardware is properly connected (refer to the Quick
1
Start Guide).
Launch your web browser.
2
Type "192.168.1.1" as the URL.
3
P-792H v2 User's Guide
Introducing the Web
Configurator
2
29
- Quick Links:
- Getting to Know Your P-792H V2
Hide quick links:
Advertisement
Table of Contents
