The Dns Screen - ZyXEL Communications P-792H User Manual

Chapter 17 Remote Management
Table 73 Advanced > Remote Management > SNMP
LABEL
Apply
Cancel

17.6 The DNS Screen

Use DNS (Domain Name System) to map a domain name to its corresponding IP
address and vice versa. Refer to
information.
Use this screen to set from which IP address the P-792H v2 will accept DNS
queries and on which interface it can send them your P-792H v2's DNS settings.
This feature is not available when the P-792H v2 is set to bridge mode. Click
Advanced > Remote MGMT > DNS to change your P-792H v2's DNS settings.
Figure 108 Advanced > Remote Management > DNS
The following table describes the labels in this screen.
Table 74 Advanced > Remote Management > DNS
LABEL
Port
Access Status
Secured Client
IP
Apply
Cancel
232
DESCRIPTION
Click this to save your changes.
Click this to restore your previously saved settings.
Chapter 7 on page 85
DESCRIPTION
The DNS service port number is 53 and cannot be changed here.
Select the interface(s) through which a computer may send DNS queries
to the P-792H v2.
A secured client is a "trusted" computer that is allowed to send DNS
queries to the P-792H v2.
Select All to allow any computer to send DNS queries to the P-792H v2.
Choose Selected to just allow the computer with the IP address that
you specify to send DNS queries to the P-792H v2.
Click this to save your changes.
Click this to restore your previously saved settings.
for background
P-792H v2 User's Guide