ZyXEL Communications P-792H User Manual page 99

Chapter 7 LAN Setup
IGMP (Internet Group Multicast Protocol) is a network-layer protocol used to
establish membership in a Multicast group - it is not used to carry user data. IGMP
version 2 (RFC 2236) is an improvement over version 1 (RFC 1112) but IGMP
version 1 is still in wide use. IGMP version 3 supports source filtering, reporting or
ignoring traffic from specific source address to a particular host on the network. If
you would like to read more detailed information about interoperability between
IGMP version 2 and version 1, please see sections 4 and 5 of RFC 2236. The class
D IP address is used to identify host groups and can be in the range 224.0.0.0 to
239.255.255.255. The address 224.0.0.0 is not assigned to any group and is used
by IP multicast computers. The address 224.0.0.1 is used for query messages and
is assigned to the permanent group of all IP hosts (including gateways). All hosts
must join the 224.0.0.1 group in order to participate in IGMP. The address
224.0.0.2 is assigned to the multicast routers group.
The P-792H v2 supports IGMP version 1 (IGMP-v1), IGMP version 2 (IGMP-v2)
and IGMP version 3 (IGMP-v3). At start up, the P-792H v2 queries all directly
connected networks to gather group membership. After that, the P-792H v2
periodically updates this information. IP multicasting can be enabled/disabled on
the P-792H v2 LAN and/or WAN interfaces in the web configurator (LAN; WAN).
Select None to disable IP multicasting on these interfaces.
99
P-792H v2 User's Guide