Smt Menu Items - ZyXEL Communications P-792H User Manual

Chapter 23 Introducing the SMT
Note: Use menu 23.1 to change the password.
Figure 133 SMT Main Menu
Getting Started
1. General Setup
2. WAN Setup
3. LAN Setup
4. Internet Access Setup
Advanced Applications
11. Remote Node Setup
12. Static Routing Setup
15. NAT Setup
Note: There is an inactivity timeout, and the default value is ten minutes. If there is no
activity for longer than this, your P-792H v2 will automatically log you out. You
will then have to telnet into the P-792H v2 again. You can use the web
configurator or the CI commands (menu 24.8) to change the inactivity timeout
period.

23.2 SMT Menu Items

The following table provides an overview of each menu item.
Table 105 Main Menu Summary
MENU
1 General Setup
2 WAN Setup
3 LAN Setup
4 Internet Access
Setup
11 Remote Node
Setup
286
Enter Menu Selection Number:
FUNCTION
Use this menu to set up device mode, dynamic DNS and
administrative information.
Use this menu to configure the DSL connection, and traffic
redirect interface.
Use this to apply LAN filters, configure LAN DHCP and TCP/IP
settings, and to allow or block layer-2 traffic between each pair of
ports.
Use this menu to configure your Internet connection.
Use this menu to configure detailed remote node settings (for
example, your ISP is a remote node) as well as apply filters.
Advanced Management
21. Filter and Firewall Setup
22. SNMP Configuration
23. System Password
24. System Maintenance
26. Schedule Setup
99. Exit
P-792H v2 User's Guide