Call Parking - Comdial DSU II Digital Expandable Systems User Manual

Advanced Call Handling

Call Parking

You can place a call on hold in the system so that it can be answered from any station
that does not have a line appearance for the call. You accomplish this by placing the
call in one of nine park orbits, where the call remains until it is answered.
To place a call on hold within the system where it can be
answered at any telephone in the system (parking a call in
orbit),
1. While on the call, PRESS INTERCOM AND DIAL
2. DIAL code for park location (orbit) (
1–9).
3. REMEMBER the code for later use OR MAKE IT KNOWN to
those who need to know in order to retrieve the call.
To retrieve a call that was placed on hold in the system
(parked),
1. From any station, PRESS INTERCOM AND DIAL
2. DIAL code for orbit 1–9 (
Handling Park Recalls
When a parked call times out of the system, it will return to your telephone in the
form of a park recall (you will hear four short tone bursts at 12-second intervals).
To answer a park recall,
1. LIFT handset. The call will then connect to your station.
To place a park recall on hold at your station,
1. LIFT handset. The call will then connect to your station.
2. PRESS HOLD. If the call remains on hold for a period of time, it
will ring back to your telephone as a hold recall.
24
to
Single Line Proprietary Telephone Station User's Guide
GCA70-246
.
to for orbit
.
).