Call Parking - Comdial and FXT Owner's Manual

GCA70-349

Call Parking

Parking a Call
You can place an intercom or outside call on hold in the system so that it can be
answered from any station, even though it may not have a line appearance for the
call. You accomplish this by placing the call in one of many park orbits, where
the call remains until it is answered.
•
To park a call in orbit,
1. While on the call, PRESS INTERCOM and DIAL
2. PRESS TRNS/CONF if intercom call.
3. DIAL code for park orbit (
10–99).
4. Remember the code for later use or make it known to those who need
to know it in order to retrieve the call.
•
To park a call using a programmed PARK button,
1. While on the call, PRESS the programmed PARK button (the
system places the call in a preselected park orbit and lights the
PARK light).
•
To retrieve a call that was placed on hold in the system
(parked),
1. PRESS INTERCOM.
2. DIAL
3. DIAL code for orbit (
OR PRESS programmed PARK button.
Handling Park Recalls
When a parked call times out of the system, it returns to your telephone in the
form of a park recall (you hear four short tone bursts at 12-second intervals).
•
To answer a park recall,
1. SELECT Answer . The call will then connect to your station.
Large Screen Display Speakerphone Station User's Guide
.
OR
to for orbit
to for orbit 10–99),
Advanced Call Handling
45