ZyXEL Communications P-870HN-5xb User Manual page 60

Chapter 4 Status Screens
Each field is described in the following table.
Table 4 Status Screen
LABEL
Refresh Interval Enter how often you want the Device to update this screen.
Apply
Device
Information
User Name
Model
Number
Serial
Number
MAC
Address
Firmware
Version
DSL
Firmware
Version
WAN 0
Information
Mode
IP Address
IP Subnet
Mask
Primary DNS
Secondary DNS
LAN
Information
IP Address
IP Subnet
Mask
IPv6
Address/
Mask
IPv6 Scope
60
DESCRIPTION
Click this to update this screen immediately.
This field displays the Device system name. It is used for identification.
Click this to go to the screen where you can change it.
This is the model name of your device.
This is the serial number of your device.
This is the MAC (Media Access Control) or Ethernet address unique to
your Device.
This field displays the current version of the firmware inside the device.
It also shows the date the firmware version was created. Click this to go
to the screen where you can change it.
This field displays the current version of the device's DSL modem code.
This is the method of encapsulation used by your ISP.
This field displays the current IP address of the Device in the WAN.
This field displays the current subnet mask in the WAN.
This field displays the primary DNS server for the WAN.
This field displays the secondary DNS server for the WAN.
This field displays the current IP address of the Device in the LAN. Click
this to go to the screen where you can change it.
This field displays the current subnet mask in the LAN.
This field displays the current IPv6 address and prefix length for the
Device's WAN interface.
This field displays whether the IPv6 address is a link-local or global
address.
P-870HN-5xb User's Guide