The Class Setup Screen - ZyXEL Communications P-870HN-5xb User Manual

Chapter 16 Quality of Service (QoS)
Table 69 QoS Queue Setup: Add
LABEL
Apply
Cancel

16.5 The Class Setup Screen

Use this screen to add, edit or delete QoS classifiers. A classifier groups traffic into
data flows according to specific criteria such as the source address, destination
address, source port number, destination port number or incoming interface. For
example, you can configure a classifier to select traffic from the same protocol
port (such as Telnet) to form a flow.
You can give different priorities to traffic that the Device forwards out through the
WAN interface. Give high priority to voice and video to make them run more
smoothly. Similarly, give low priority to many large file downloads so that they do
not reduce the quality of other applications.
Click QoS > Class Setup to open the following screen.
Figure 104 QoS Class Setup
The following table describes the labels in this screen.
Table 70 QoS Class Setup
LABEL
Add
Order
Active
Class Name
Classification
Criteria
200
DESCRIPTION
Click Apply to save your changes back to the Device.
Click Cancel to begin configuring this screen afresh.
DESCRIPTION
Click this button to create a new classifier.
This field displays the index number of the classifier.
Select the check box to enable the classifier.
This is the name of the classifier.
This shows criteria specified in this classifier, for example the interface
from which traffic of this class should come and the source MAC
address of traffic that matches this classifier.
P-870HN-5xb User's Guide