Main Window; Status Bar - ZyXEL Communications P-870HN-5xb User Manual

Chapter 3 Introducing the Web Configurator
Table 3 Navigation Panel Summary
LINK TAB
Logs View Log
Log Settings
Tools Firmware
Configuration
Restart
Diagnostic General
802.1ag
OAM Ping Test

3.2.2 Main Window

The main window displays information and configuration fields. It is discussed in
the rest of this document.
Right after you log in, the Status screen is displayed. See
for more information about the Status screen.

3.2.3 Status Bar

Check the status bar when you click Apply or OK to verify that the configuration
has been updated.
56
FUNCTION
Use this screen to view the logs for the level that you selected.
Use this screen to change your Device's log settings.
Use this screen to upload firmware to your device.
Use this screen to backup and restore your device's configuration
(settings) or reset the factory default settings.
This screen allows you to reboot the Device without turning the
power off.
Use this screen to test the connections to other devices.
Use this screen to configure CFM (Connectivity Fault
Management) MD (maintenance domain) and MA (maintenance
association), perform connectivity tests and view test reports.
This screen displays information to help you identify problems
with the DSL connection.
Chapter 4 on page 59
P-870HN-5xb User's Guide