ZyXEL Communications P-870HN-5xb User Manual page 94

Chapter 5 WAN Setup
5.6.1.7 Configuration Summary
This read-only screen shows the current WAN connection settings.
Figure 43 WAN Configuration: Configuration Summary
The following table describes the labels in this screen.
Table 22 WAN Configuration: Configuration Summary
LABEL
Connection Type
Service Name
Service Category
IP Address
Service State
NAT
Full Cone NAT
Firewall
IGMP Multicast
MLD Multicast
IPv6
Back
Apply/Save
94
DESCRIPTION
This is the encapsulation method used by this connection.
This is the name of the service.
This is the ATM traffic class.
This field is blank for a PTM or Ethernet WAN connection.
This shows whether the WAN IP address is assigned by the ISP,
manually configured or not configurable.
This shows whether this service is active or not.
This shows whether NAT is active or not for this connection.
This shows whether full cone NAT is active or not for this connection.
This shows whether Firewall is active or not for this connection.
This shows whether IGMP multicasting is active or not for this
connection.
This shows whether MLD multicasting is active or not for this
connection.
This shows whether IPv6 is active or not for this connection.
Click this button to return to the previous screen.
Click this button to save your changes.
P-870HN-5xb User's Guide