Adding Url Filter - ZyXEL Communications P-870HN-5xb User Manual

Chapter 20 Parental Control
The following table describes the fields in this screen.
Table 86 Parental Control > URL Filter
LABEL
Enable URL Filter
URL List Type
#
Active
Address
Port
Modify
Add
Apply

20.3.1 Adding URL Filter

Click the Add button in the URL Filter screen to open the following screen.
Figure 133 URL Filter Configuration
The following table describes the fields in this screen.
Table 87 URL Filter Configuration
LABEL
URL Address
Port Number
Back
Save/Apply
244
DESCRIPTION
Select the check box to enable URL filtering on the Device.
If you select Block, the Device prohibits the users from viewing the
Web sites with the URLs listed below.
If you select Access Only, the Device blocks access to all URLs except
ones listed below.
This is the index number of the rule.
Select the check box to enable the filtering rule.
This is the URL of the web site in this rule.
This is the port number the web server uses to forward HTTP traffic.
Click the Edit icon to go to the screen where you can edit the rule.
Click the Remove icon to delete an existing rule.
Click Add to create a new rule.
Click this button to save your settings back to the Device.
DESCRIPTION
Enter the URL of web site to which the Device blocks or allows access.
Specify the port number the web server uses to forward HTTP traffic.
Click this button to return to the previous screen without saving any
changes.
Click this button to save your settings back to the Device.
P-870HN-5xb User's Guide