The Wps Station Screen - ZyXEL Communications P-870HN-5xb User Manual

Chapter 7 Wireless LAN
Click Network > Wireless LAN >WPS. The following screen displays.
Figure 61 Network > Wireless LAN > WPS
The following table describes the labels in this screen.
Table 34 Network > Wireless LAN > WPS
LABEL
WPS Setup
Enable WPS
PIN Number
Generate
WPS Status
Apply

7.7 The WPS Station Screen

Use this screen to set up a WPS wireless network using either Push Button
Configuration (PBC) or PIN Configuration.
130
DESCRIPTION
Select the check box to activate WPS on the Device.
This shows the PIN (Personal Identification Number) of the Device. Enter
this PIN in the configuration utility of the device you want to connect to
using WPS.
The PIN is not necessary when you use WPS push-button method.
Click this button to have the Device create a new PIN.
This displays Configured when the Device has connected to a wireless
network using WPS or Enable WPS is selected and wireless or wireless
security settings have been changed. The current wireless and wireless
security settings also appear in the screen.
This displays Unconfigured if WPS is disabled and there is no wireless
or wireless security changes on the Device.
Click Apply to save your changes back to the Device.
P-870HN-5xb User's Guide