ZyXEL Communications P-870HN-5xb User Manual page 88

802.11n vdsl2 4-port gateway
Hide thumbs Also See for P-870HN-5xb:
Table of Contents

Advertisement

Chapter 5 WAN Setup
Table 17 WAN Configuration: IPoE
LABEL
Vendor Class
Identifier
Enable DHCP
Option 61
IAID
DUID Type
Identifier
Enable DHCP
Option 125
Manufacturer
OUI
Product Class
Model Name
Serial Number
Use the following
Static IP address
WAN IP
Address
WAN Subnet
Mask
WAN gateway
IP Address
Obtain an IPv6
address
automatically
Obtain an
IPv6 address
from DHCPv6
server
Use the following
Static IPv6
address
WAN IPv6
Address
88
DESCRIPTION
Enter the Vendor Class Identifier (Option 60), such as the type of the
hardware or firmware.
Select this to identify the Device in DHCP requests that the Device
sends to a DHCP server when getting a WAN IP address.
Enter the Identity Association Identifier (IAID) of the Device. For
example, the WAN connection index number.
Select Other to enter any string that identifies the Device in the
DUID field.
Select DUID-LL (DUID Based on Link-layer Address) to enter the
Device's hardware address, that is the MAC address in the DUID field.
Select DUID-EN (DUID Assigned by Vendor Based on Enterprise
Number) to enter the vendor's registered private enterprise number.
Enter a unique identifier assigned by the vendor.
This field is available when you select DUID-EN in the DUID Type
field.
Select this to add vendor specific information to DHCP requests that
the Device sends to a DHCP server when getting a WAN IP address.
Specify the vendor's OUI (Organization Unique Identifier). It is usually
the first three bytes of the MAC address.
Enter the product class of the Device.
Enter the model name of the Device.
Enter the serial number of the Device.
Select this if you have a static IP address.
Enter the static IP address provided by your ISP.
Enter the subnet mask provided by your ISP.
Enter the gateway IP address provided by your ISP.
Select this option if you want to have the Device use the IPv6 prefix
from the connected router's Router Advertisement (RA) to generate
an IPv6 address.
Select this checkbox if you want to obtain an IPv6 address from a
DHCPv6 server.
The IP address assigned by a DHCPv6 server has priority over the IP
address automatically generated by the Device using the IPv6 prefix
from an RA.
Select this option if you have a fixed IPv6 address assigned by your
ISP.
Enter the static IPv6 address provided by your ISP.
P-870HN-5xb User's Guide

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents