Table of Contents
Advertisement
Programming
S Y S T E M APPLICATION
8.
ABBR. NO. ASSIGN.
(Speed Dial)
Individual
Show Sta
º To Increase
º To Decrease
Common List
Show Tenant
º To Increase
º To Decrease
9.
CO LINE COPY
Individual Copy
Copy From
Copy To
Group Copy
Copy From
Copy To
Chapt er 3 - Key Station Features, Opera tion, and Programming
Table 3-8: System Application Programming Table
Range
-
0-50
50-0
-
1-6
0-1000
1000-0
-
-
-
-
-
-
Default
Abbreviated Numbering Assignment (used
to program speed dial location allocation)
Personal speed dial bins
-
Enter station number.
0
Use setting to allow number of speed bins
per station. (Go to next setting to reduce
number.)
50
Use setting to allow number of speed bins
per station. (Go to previous setting to
increase number.)
-
System speed bins
-
Enter tenant group.
100
Use setting to allow number of speed bins
per tenant group. (Go to next setting to
reduce number.)
100
Use setting to allow number of speed bins
per tenant group. (Go to previous setting to
reduce number.)
The system allows for copy of the line
features from port to por t.
Features copied: Tenant Group, Route, Day &
Night COS, Dialing Mode Trunk Type, Call
Abandon Private and Answering Position.
-
Used to copy a single line setting to another
line or lines, one line at a time.
-
Enter valid trunk number to be used as
template.
-
Enter valid trunk number to be changed.
-
Copies settings from individual line to trunk
group.
-
Enter valid trunk groupnumber to be used as
template.
-
Enter valid trunk group number to be
changed.
Description
3-29
Advertisement
Table of Contents
