Table of Contents
Advertisement
Programming
System Programming Tables
The following tables briefly describe the
default values.
S T A T I O N
1.
POSITION
2.
TENANT GROUP
3.
PICKUP GROUP
4.
PAGING GROUP
5.
STA TYPE
6.
DAY COS
7.
NIGHT COS
8.
WARNING TONE
9.
DROP TIME OUT
10.
INTRUS. ACTIVE
11.
INTRUS. ACCEPT
12.
INTRUS. TONE
13.
NO FUNC. KEY
14.
FORCED LCR
15.
DATA AUTO ANS
Chapt er 3 - Key Station Features, Opera tion, and Programming
DHS-L
Table 3-1: Station Programming Table
Range
Default
Non-
None
Programmable
1-6
1
1-24
1
1-24
1
Staff/Guest
Staff
0-7
0
0-7
0
Y/ N
N
Y/ N
N
Y/ N
N
Y/ N
Y
Y/ N
Y
Y/ N
Y
Y/ N
N
Y/ N
Y
system functions and their programming
Desc ription
Represents the system position for that
station number (1-XX-YY ):
1 = module (1 only)
XX = card slot 4-12
YY= por t on card 01-08, 01-16.
There are 6 tenant groups in the system.
Each station may be assigned to one tenant
group.
Stations can only be assigned to one group.
Stations within a group may answer calls
from another station by dialing the pickup
code.
Stations may be in only one page group and
will receive internal pages for only that
group.
Staff is used for normal office operation;
Guest for Hotel/Motel.
Determines the station d ialing privileges in
the day mode of operation (no restrictions).
Determines the station d ialing privileges in
the night mode of operation (no restrictions).
The Drop Time-out Warning Tone is used to
alert a station user that a CO call is about to
be dropped. Other programming determines
when a call is dropped.
Drop time-out automatically terminates CO
calls after a programmed time. The time is
programmed in Call Handling if warning
tone is enabled it will be heard before the
call is dropped.
Allows a station to monitor another station.
Allows the station to be monitored.
Determines if a station being monitored will
hear a tone when being monitored.
Allows a function key on the phone.
Forces all calls through the Least Cost
Routing feature.
This feature is currently not used.
3-7
Advertisement
Table of Contents
