Table of Contents
Advertisement
3-140
Chapter 3 - Key Station Features, Operation, and Programming
Configuring
Complete the following steps to configure the
1. Set Up Voice Mail Ports
a. Connect Single Line Adapter box to system (make note of extension numbers),
b. Enter programming mode: [FEAT] + [#] + [
c. Press [show] twice.
d. Enter the first station number to be used as a VM port, then press [show].
e. Press [next] until PORT TYPE appears.
f.
g. Repeat Steps 1-d thru 1-g for all stations to be entered as VM ports.
h. When finished, press [hold] twice.
2. Assign Station Numbers to UCD Group
a. Press [next] until STA APPLICATION appears, then press [show].
b. When UCD PROGRAMMING appears, press [show].
c. Enter a [1] on the keypad, then press [show].
d. When TENANT:1 appears, press [next].
e. When UCD ATTRIB:UCD appears, press [next].
f.
g. When MEMBER 1: appears, press [chg].
h. Enter VM number (port), then press [save].
i.
j.
3. Enter Transfer/Intercom Prefixes and Suffixes
a. Press [next] to go to the Voicemail screen.
b. Press [show] until VM HUNT GROUP appears, then press [chg].
c. Enter Group used in Step 2-c, then press [save].
d. Press [next] until PREFIX TABLE appears, then press [show].
e. When ICM/VM: appears, press [chg].
f.
g. Press [next] until TRANSFER appears, then press [chg].
h. Press [FEAT + 4] and dial [7], then press [save].
i.
j.
k. Press [next] until BUSY FWD appears, then press [chg].
l.
m. Press [next] until NO_ANS FWD appears, then press [chg].
n. Press [FEAT + 4] and dial [7], then press [save].
o. Press [next] until DND FWD appears, then press [chg].
p. Press [FEAT + 4] and dial [7], then press [save].
DHS-L
with a Vodavi Voice Mail System
OR install a SLIB card.
Press [chg] to select VM.
When UCD GP MEMBER appears, press [show].
Press [next], then repeat Steps 2-g and 2-h for all VM ports.
Press [hold] three times to return to STA APPLICATION.
Press [FEAT + 4] and dial [7], then press [save].
Press [next] until DIRECT FWD appears, then press [chg].
Press [FEAT + 4] and dial [7], then press [save].
Press [FEAT + 4] and dial [7], then press [save].
STARPLUS
DHS-L
system
] + [########] + [save].
✳
Voic e Mai l
:
Advertisement
Table of Contents
