Table of Contents
Advertisement
3-18
Chapter 3 - Key Station Features, Operation, and Programming
R E S T R I C T I O N
2.
LCR Tab. Prog.
º Digit Comp. Tab.
º List Number
Time of Day Tab.
º List Number
º Time Assignment
º Route Assignment
Table 3-5: Restriction Programming Table
Range
Default
001-300
01-60
Description
The content of the LCR tables are
programmed in the following tables.
The digit comparison tables are programmed
similar to the toll restriction tables.
Enter a FROM: digit 0-9 X = wildcard to a TO:
dig it 0-9 X = wildcard
Time of Week List=
Sunday=1
Monday=1 – Saturday=1
The time of week list is used to assign LCR
trunk route numbers to this interval for a
particular day of the week.
The digit comparison tables are programmed
similar to the toll restriction tables.
Enter a FROM: digit 0-9 X = wildcard to a TO:
dig it 0-9 X = wildcard
Time of Week List=
Sunday=1
Monday=1 – Saturday=1
The time of week list is used to assign LCR
trunk route numbers to this interval for a
particular day of the week.
Time of day tables define which LCR trunk
routes will be used for a par ticular time of
day. A different LCR trunk route may be
assigned to a different time slot during the
day.
Enter a time of day list number.
The time assignments are established by
entering a starting time in TIME 1 and an
ending time in TIME 2.
TIME 2 then becomes your starting time for
the next time slot of the day.
TIME 6 becomes the start time for the last slot
of the day with TIME 1, time 1 being the
ending time.
Each time slot has an LCR route table
assigned to it. Enter a route 1-24 for each
time slot for the day.
Programmi ng
Advertisement
Table of Contents
