STARPLUS DHS-L Technical Manual page 89

Programming
R E S T R I C T I O N
2. Time of Day Tab.
º List Number
º Time Assignment
º Route Assignment
Route Tab.
º List Number
º Choice
º Route
Dgt Modi Tab.
º List Number
º Delete Digits
º Prefix Digits
º Insert Digits
º Insert Position
Chapt er 3 - Key Station Features, Opera tion, and Programming
Table 3-5: Restriction Programming Table
Range Default
01-60
1-24
1-4
1-24
1-24
None,1-16
0-9,*,# Empty
0-9,*,# Empty
0-16
Description
Time of day tables define which LCR trunk
routes will be used for a par ticular time of
day. A different LCR trunk route may be
assigned to a different time slot during the
day.
Enter a time of day list number.
The time assignments are established by
entering a starting time in TIME 1 and an
ending time in TIME 2.
TIME 2 then becomes your starting time for
the next time slot of the day.
TIME 6 becomes the start time for the last slot
of the day with TIME 1, time 1 being the
ending time.
Each time slot has an LCR route table
assigned to it. Enter a route 1-24 for each
time slot for the day.
There are 24 route tables. Each table has 4
dig it modification tables -- choice 1 is the
primar y; choice 2 is the secondary, etc.
Enter the list number.
Enter the choice.
Enter the trunk route to use when this choice
is implemented.
There are 24 digit modification tables which
are used in conjunction with the trunkroutes
to ensure that the proper dialing sequence is
performed.
Enter the number of the digit modification
table to be prog rammed.
0 Enter the location of the digit, if any to delete
from the dialing string. The location can be
from 0 (none) to 16.
Up to 14 digits can be prog rammed as prefix
dig its Prefix digits are dialed prior to the
number and can be 0-9,*,# pause and wait for
dialtone.
Up to 16 digits may be inserted into the
dialing string. The digits are inser ted in the
string at the insert location.
0 The inserted digits are inser ted at the insert
position. The insert position can be 0 (none)
to 1-16.
3-19