Table of Contents
Advertisement
Cal ler Id enti fi cation (ICLID )
6. Press [show]. The display shows:
7. Press [chg].
8. Enter desired station number, then press [save].
9. Press [clear] when completed.
Default
The
DHS-L
CO P-FWD TIME = 30
CO XXX DEST = Empty
CO XXX VMID = Empty
Programmable Range
CO Line Preset Forward data fields:
CO P-FWD TIME = 10/20/30/40/50/60 sec
CO XXX DEST = 201-272, 301-372 Stations, 430-459 Hunt / VM Groups
CO XXX VMID = 0-9
Caller Identification (ICLID)
Description
Incoming Caller Identification (ICLID) is an optional service offered by the local telephone
company. When properly equipped, the
Executive telephones that are assigned to ring for this incoming line will display the caller
data while the call is ringing.
The key system operation of this feature is dependent on the feature first being activated
from the Telephone Central Office (CO) so that the number/name of the calling party will
be delivered over the individual tip and ring of the CO lines during the first silent interval
between ringing.
The features implemented are:
1. Calling number or name display on initial ring-in of a line on the display keysets.
2. Incoming call number/name recording on the SMDR printout.
3. Retaining a list of the last 100 Unanswered Calls in a table for user access.
CO P R E D EST
ba ck
n ext
default settings of associated CO Line Preset Call Forward data fields are:
✳ ✳ ✳ ✳
#P(F4) (six digits maximum)
Chapt er 3 - Key Station Features, Opera tion, and Programming
: N UL L
c h g
DHS-L
will display this caller ID information.
3-61
Advertisement
Table of Contents
