STARPLUS DHS-L Technical Manual page 81

Hide thumbs Also See for Starplus DHS-L:
Table of Contents

Advertisement

Programming
C A L L H A N D L I N G
17.
D_TONE TIME
18.
DIAL WAIT TIME
19.
B_TONE TIME
20.
DIAL DELAY
21.
CO PRECFW TME
22.
CAMP ON TIME
23.
ALARM PLAY
24.
HOTEL ENABLE
25.
SYS ABBR CHECK
26.
TSI CONNECT
27.
CONF TONE
28.
CALL DURATION
29.
VM MON TIME
30.
METER SYSTEM
31.
ICLID NAME
32.
TENANT CALLING
Chapt er 3 - Key Station Features, Opera tion, and Programming
Table 3-3: Call Handling Programming Table
Range
Def ault
200-800
0-8
100-800
100/500....2000
10-60
0-60
10/30/60-600
Y/N
Y/N
Y/N
Y/N
1-60
10-60
Y/N
Y/N
Y/N
200
This timer is used if the Dial Tone Detect
option is set to YES.
0
This timer is used when the Dial Tone Detect
is set for NO.
500
The Busy Tone Interval is used to match the
expected busy tone from the CO/PBX. This
option is used with the AUTO BUSY REDIAL
feature.
500
When making an outgoing CO call this is the
time of delay the transmission path must be
delayed before a connec tion. This is used
with the toll restriction feature and must
match the time the CO requires before
providing dial tone. This is set in
milliseconds.
30
This timer controls when a CO line will be
preset forwarded when programmed under
CO Parameters: Answer Position: CO Preset
Forward.
20
This sets the interval between camp on
tones.
30
This option sets the reminder beep when the
extension reminder is reached.
N
This feature is used to set Hotel/Motel
features on system.
N
When set to Yes the stations COS determines
what speed dial locations may be dialed.
N
This option enables/disables the outgoing
CO call transmission path before toll
restriction is satisfied.
N
This enables/disables conference tone.
10
This option is used for outgoing call to
simulate answer super vision for SMDR.
10
This timer controls the maximum interval
allowed for a station user to ac tivate the
Answering Machine Emulation feature.
N
This is not applicable to the
Y
Determines if the calling name will be
displayed (if provided) on display phones
and ICLID ID enabled.
Y
Determines which tenant groups can call
each other.
Description
DHS-L
.
3-11

Advertisement

Table of Contents
loading

Table of Contents