Table of Contents
Advertisement
3-120
Chapter 3 - Key Station Features, Operation, and Programming
To erase the contents of a Speed Dial bin:
1. Press [FEAT ].
2. Dial [1].
3. Dial the bin number (500-549) to erase.
4. Press [HOLD]. You will hear confirmation tone.
E
XE CU TIVE
To store a telephone number in a personal Speed Dial bin:
1. Press [FEAT ].
2. Dial [1]. The display shows:
3. Dial the bin number (500-549) where you want to store the telephone number. (You
can press [bksp] and [chg] to correct errors.)
4. Press [show]. The display shows the current contents of that bin:
5. Press [chg]. The display shows:
6. Dial the telephone number to be stored (up to 16 digits).
7. Press [save].
To continue storing telephone numbers in additional bins:
Repeat Steps 3 through 5 (for Enhanced Telephones) and 3 through 7 (for Executive
Telephones).
To erase the contents of a Speed Dial bin:
Press [save] instead of dialing a number in Step 4 (Enhanced) and Step 6 (Executive).
To exit speed dial programming:
Press [CLEAR].
To chain together Speed Dial bins:
Enter [FEAT] + [1] + [BIN #] as part of the number in any speed bin to dial that bin
contents, after the contents of the current bin.
K
T
--
EY
E LEPHONE
AB B R D IR #
bks p
EMP T Y
__
bks p
16 02 55 51 21 2 @ 0 0
: _ _
sh o w
c h g
c h g
sa ve
c h g
c h g
Speed D ialing (ABBR)
Advertisement
Table of Contents
