STARPLUS DHS-L Technical Manual page 61

DHS- L Instal lation
.High Profile Mount -- For the High
Profile Mounted position, refer to the
illustration and attach the Base Mount
wedges.
1. The small wedge is always used
for the various telephone
mounting positions.
2. The small wedge has locking tabs
at one end and hooks at the other
end used in a hinging fashion.
Low Profile Mount -- When the key
telephone is to be desk mounted in
the Low Profile position:
1. Remove the two small screws that
secure the small and large wedges
together.
2. Store the larger wedge for
possible use later (the large
wedge is not used when
mounting the key telephone in
the Low Profile position).
3. Position the smaller wedge as illustrated.
When using the Low Profile mounting position, it is important that the line cord be
channeled through the slots in the telephone bottom housing, such that the smaller
wedge locks them in place when in position.
Wall Mount -- When the telephone is
to be Wall Mounted:
1. Remove the two small screws that
secure the small and large wedges
together.
2. Store the larger wedge for
possible use later (the large
wedge is not used when wall
mounting the key telephone).
3. Position the smaller wedge as in
the illustration at the right for wall
mounting. Once in position, the
smaller wedge and key telephone
bottom housing provide for
standard 630-type wall mount
wall jacks.
Chapter 2 - Description a nd Installation
2-43